Marine Teak Sealer

$98.00 inc GST


Keeps Boat Teak Clean and Looking Natural

Yacht Shine Marine Teak Sealer when applied to new or freshly cleaned teak penetrates into the grain and forms a long-lasting sub-surface barrier prohibiting the deep-grain intrusion of soot, airborne pollutants, food and beverage spills. The Marine Teak Sealer is invisible when dry leaving your teak its natural silver color. Decks retain their needed sure-footedness – even when wet

Periodic refreshing of your teak with the Yacht Shine Marine Teak Sealer will significantly reduce harsh 2-part cleanings!

  • Water-Based – Contains No Oils
  • Repels Dirt, Soot, Spills
  • Fast, Easy Application
  • Planet-Safe “Green” Formulation
  • Ready-To-Use

Additional information


473ml, 3.8L

Directions for Use


  • Restore Teak to its Peak Appearance
  • If sanded brush away residual dust
  • If freshly cleaned allow to dry completely


Avoid midday sun (10am-2pm). Min Temp: 10°C

Spray: Through trigger sprayer or pump-up, lightly wet teak – do not saturate. Follow immediately with bristle brush, microfiber mop/roller to spread evenly and assist into grain.

Microfiber Roller / Mop or Bristle Brush: Transfer product to applicable container. Load applicator and going with grain lightly wet teak – do not saturate, spreading evenly. Light pressure on the applicator will assist product into grain.

Allow 1st coat to thoroughly dry – apply 2nd coat immediately after dry

Coverage: aprox. 74 m2 per 3.78 L